Garden Tool Storage Rack

Garden Tool Storage Rack

I needed some way to hang up all our garden tools so came up with this not very fancy, but quite useful garden tool storage rack that I built out of one piece of regular 2×6 lumber.

IMG_6523

First I marked up and drilled two holes near each other using a spade bit.

Garden Tool Storage Rack

I repeated this all the way down the wood at regular intervals.

Garden Tool Storage Rack

Next I got out my jigsaw and connected all the pairs of holes together along with creating an opening to the front.

Garden Tool Storage Rack

This seemed to look reasonable so I repeated it along the whole length, making some of them slightly different sizes for different tools.

Garden Tool Storage Rack

I then used a couple of off-cuts to use as mounting blocks and attached it to the wall.

Garden Tool Storage Rack

Hey Presto! Not a very elegant rack but it did the job quickly and for far less than the ones in Home Depot.

Be the first to comment on "Garden Tool Storage Rack"

Leave a Reply

%d bloggers like this: